Sold millions of times and suitable for any single point 

lubricating task with grease or oil. The automatic lubricator 

simalube provides all possible kinds of lubricating points 

with lubricant. 24 hours, day in, day out. Roller bearings 

which are not lubricated sufficiently or wrongly drop out long 

before they have reached their expected product life. simalube 

lubricators guarantee a consistent supply of lubricant in the 

pre-adjusted proportioning. Shutdown times are decreased and 

costs in comparison to time-consuming lubrication by hand are 

clearly reduced. Within seconds simalube is fixed to the 

lubricating point. On commissioning, a gasproduction cell is 

activated which presses the lubricant on the lubrication point 

through the release of hydrogen gas. The lubricating amount can 

be steplessly adjusted by means of an Allen key. Filled with oil, 

simalube is applied for the automatic lubrication of chains, open 

gears or guide rails for example.

Technical information

The simalube lubricator is available with a content of 30ml, 60ml, 125ml and 250ml. The compact installation size of the simalube is ideal for limited space.

Product specification

Product  Automatic longterm grease and oil dispenser Power generation  hydrogen gas producing drycells Working pressure  max. 5 bar Adjustment  stepless 1-12 month Dispensing quantity  0.08 - 8.3 ml/day Operating temperature from -20°C to + 55°C Usage Grease dispenser can be installed in any position, even under water. Attention: do not expose to direct heat.  Certifications / Approvals       II 1G Ex ia IIC T6 II 1D Ex iaD 20T 80°C I M1 Ex ia I   Ingress protection  IP68  (dustproof and waterproof) Usage period  within 2 years of filling date Stock temperature  recommended at 20°C +/- 5°C Sizes 30 ml 60 ml 125 ml 250 ml Weight full ~82g ~115g ~190g ~335g Weight empty ~55g ~60g ~75g ~111g